Will an ECHO Backpack Blower PB-770h Fit Packem Utility Trailer Rack # PK-6-OP1

Updated 06/18/2013 | Published 06/15/2013

Products Featured in This Question

Pack'Em Rack for Open Utility Trailers - Holds 3 Trimmers, 1 Blower, 1 Line Spool, 1 Cooler

(310)

$282.53

Rack'Em Backpack Blower Adapter for STIHL BR350, BR430, BR550, BR600, ECHO, or RedMax Blowers

(24)

$26.41

Question:

I have echo-pb770h wondering if it would fit on the blower mount you guys offer

asked by: Kraig

Helpful Expert Reply:

For an ECHO blower, you would have to use an adapter to mount the blower on the Packem rack # PK-6-OP1. The adapter that you need is # RA-STIHL.

Another Expert found that to attach the blower frame, the tubing must be slit lengthwise and wrapped around the frame before attaching the adapter plate with the 2 small U-bolts. The tubing will protect the frame and help hold the plate in place. Tighten the lock nuts until the plate starts to compress the tubing and it is held securely in place. Do not over tighten. Make sure the nylon locking element in the nut fully engages the thread of the U-bolt. There must be at least 3/8-inch of thread showing after tightening. After tightening, hang the blower on the rack using the large hole in the adapter plate.

expert reply by: Michael H