Recommended Trailer Cover for Urban Street Yeti Sherpa Trailer
Updated 09/20/2021 | Published 09/18/2021 >
Question:
Hello, I have a Sherpa Trailer: Tear covers dont seem to be shaped for this trailer. I have looked at a 10' horse trailer cover and its large but might work. The dimensions of the trailer are 102" long. 96" wide including fenders and about 48" tall. What trailer storage cover might work with this trailer? Thank you,
asked by: Jim A
Helpful Expert Reply:
The best option we have available for your Sherpa trailer is the Adco SFS AquaShed Cover for Bumper Pull Trailer - Up to 10' Long - Gray # 290-46001.
This cover fits trailers that are 8'1" - 10' long. The width is 106" so that would also work well for your trailer. The biggest concern would be the height. The height of the cover is 94" and your trailer is only 48" tall so that leaves quite a bit of extra material. It has cinch ropes at the front and rear of the cover to remove slack but with an extra 4' on top it will not eliminate it all.
Other customers have reported using additional straps or something similar to help secure the cover when it has too much excess material. The main problem with this comes from living in a windy area so if you live somewhere that sees frequent high winds I would not recommend it. Without a snug, natural fit the cover is susceptible to damage from the elements.
Product Page this Question was Asked From
Adco SFS AquaShed Trailer Cover for Bumper Pull Horse Trailers up to 10' Long - Gray
- Covers
- Trailer Covers
- Horse Trailer Covers
- Bumper Pull Horse Trailers
- 10 Feet Long
- Gray
- ADCO
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Recommended Cover for a 7 x 14 V-Nose Enclosed Trailer
- Q&A: Recommended Cover for 7x12 V-Nose Utility Trailers
- Q&A: Recommended Cover for a Sunset Park RV Sun-Lite 16BH
- Q&A: Recommended Cover for a 2026 KZ Sportsmen 130 RD
- Q&A: Cover For 16 Foot Cargo Trailer
- Q&A: Recommended Tongue Mounted Tool Box For A Big Tex 70PI Trailer
- Q&A: Trailer Cover for a 6' x 12' Enclosed V-Nose Trailer
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: How to Determine Tire/Wheel Diameter
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)


