Can Shorter Screws be Used For Advent AC ACM135C if Roof is Not 2-1/2 Inches Thick
Updated 08/16/2021 | Published 08/14/2021
Question:
I am considering the Advent AC 13,500 BTU as a replacement for my Carrier Model No. 68RV14103A Low Profile. I see the roof thickness must be 2.5 inch to 5 inch or you would need a spacer. Can you just replace the 4 screws for shorter ones if the roof is less than 2.5?
asked by: Erick R
Expert Reply:
You shouldn't just use shorter screws if your roof is not 2-1/2 inches thick when installing the Advent Air RV Air Conditioner w/ Air Distribution Box and Start Capacitor - 13,500 Btu # ACM135C.
The issue isn't just the hardware, it's the fit of the entire unit, including the distribution box, as well as ensuring the overall strength of where the unit attaches to the roof. If yours isn't 2-1/2 inches thick you'll need to build up the base with supports.
I have added a link below to a video review for you to check out as well of the Advent Air RV Air Conditioner w/ Air Distribution Box and Start Capacitor - 13,500 Btu # ACM135C.
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Adding A Rooftop A/C Unit To An Enclosed Trailer
- Q&A: Air Conditioner Recommendation for V-Nose Enclosed Trailer
- Q&A: Advent Vs. Atwood RV AC Units in Terms of Cooling Power and Noise Level
- Q&A: Air Conditioning Kit Needed for a 6 x 6 x 12 Enclosed Cargo Trailer
- Q&A: How To Install the Advent Air RV Air Conditioner On Roof Less Than 2-1/2" Thick
- Q&A: Recommended Rooftop Air Conditioner for Cargo Trailer with 2,000 Watt Generator