Determining If Replacement Landing Gear Leg LC179014 Fits 2005 Pilgrim 27 5th Wheel Trailer

Updated 07/26/2021 | Published 07/24/2021

Question:

i need to replace the following landing gear on my 2005 pilgrim 27 ft 5th wheel. the main tube is 29-1/2. the bracket stops are 13-1/2 apart. is lc179014 the right part? thank you

asked by: WAYNE K

Expert Reply:

I would be happy to help!

The Replacement 5th Wheel RV Landing Gear Follow Leg w/ Snap Pin for RVs # LC179014 you were looking at has a main tube measurement of 29-1/2" as you mentioned, but has a weld stop dimension of 15-1/2" from the bottom of the upper weld stop to the top of the lower weld stop, and 17-1/2" from the top of the upper weld stop to the bottom of the lower weld stop.

We do not currently carry and landing gear legs with 13-1/2" between the weld stops, but a qualified welder should be able to move the brackets on your trailer and install this leg pretty easily on your trailer.

I included a video of the # LC179014 for you to take a look at.

expert reply by: Samuel C