Trailer Hitch Fit for BMW 2021 X3

Updated 07/07/2021 | Published 07/06/2021

Products Featured in This Question

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

(135)

$222.14

1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs

(2619)

$12.45

2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs

(1358)

$12.80

Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs

(3838)

$41.40

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(51)

$98.92

Question:

I once had a hitch installed by BMW for 2013 x5, the service tech said installation was so expensive because they had to reprogram the vehicle for towing? No reprogramming is needed for this hitch? Thanks for your input!

asked by: Ben M

Expert Reply:

According to the linked installation instructions, no reprogramming is required to install the Draw-Tite Class III hitch, part # 76226. The hitch is a fit for all models of the 2021 BMW X3 xDrive 30i and M40i.

Sometimes, if a dealer installed trailer wiring harness is installed, the vehicle computer will need to be re-flashed, but the same isn't true for aftermarket trailer wiring which are designed to stand alone.

If you'll be towing with the hitch, you'll also need a trailer wiring harness, part # TK77FR, a ball mount like # D-28, a # PC3 hitch pin and # 19260 for a 1-7/8 or # 63845 for a 2 inch hitch ball.

I've linked to an install video for the hitch.