Pairing A Side Marker Camera On The Furrion Vision S Wireless RV Back Up Camera

Updated 07/22/2026 | Published 06/23/2021

Question:

I have installed the furrion side cameras and after repeated attempts to pair cameras to monitor cant get them paired what am I doing wrong please help

asked by: Mark R

Expert Reply:

The steps to pairing a camera on your Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen Item # FOS05TASF are:

1. Hook up your trailer to your vehicle.
2. Make sure you have power running to your cameras (blue lights will be lit on the cameras).
3. Press the menu button on your monitor.
4. Press the pairing button.
5. Press the camera you choose to pair on the monitor.
6. Hit the little black pairing button on your camera.

If you are still having issues please reply back and we can keep troubleshooting.

expert reply by: Kevin C

Jim S.

2/18/2024

Where is the menu button on the monitor? For pairing?

Kevin C.

2/19/2024

@JimS If you press the button on the side of the monitor it will pull up the menu and then you can press the 'Pairing' button on the screen to begin the pairing process. Just make sure you also press in the pairing button on the camera that you're trying to pair as well.

Brandon L.

3/12/2025

I’ve done all of these steps but my side camera will not pair. I press the black button on the cameras but nothing happens.

Dan P.

3/16/2025

Cannot get my side cameras to connect to my monitor at all

Ray

8/23/2025

Still didn’t pair

Darren T.

5/17/2026

I'm just posting this here in case someone is still trying to pair the side cameras. I tried to pair the camera several times by pressing the pairing button on the bottom of the camera with my finger but it would not pair. Then I gently pushed the button with the tip of a Phillips screwdriver and heard a "click". It paired immediately. I don't think I could push the button far enough with my finger.