Pace Edwards Tonneau Cover and Ladder Rack that Fits 2021 Chevy Silverado 3500 Short Bed

Question

Question:

will item # PE68CV work with Item # 311-CR3004 On my 2021 Chevrolet Silverado 3500 . Thanks

asked by: Bob H

1

Helpful Expert Reply:

We have a very similar option that does work but the Pace Edwards tonneau for your 2021 Chevy Silverado 3500 needs to be one that has the Explorer style rails like the Pace Edwards JackRabbit with Explorer Rails # PE76CV to allow the Contractor Ladder Rack # 311-CR3004 to fit.

expert reply by: Jameson C

1

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 5

Hi Curtis! We have you covered! Pun intended. ^___^ What you are looking for are the following parts: Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover w Explorer Rails - Aluminum #PE36CV Pace Edwards Contractor Rig Rack Truck Bed…

view full answer...

Answer 6

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 7

Hi Richard! From the top of the shank to the lowest part where the tri-ball sits on the #BWTS20067BMP is 11.125". If you have the balls at max drop with the tallest one hanging down that would be 12.5". We recommend at least 11" of…

view full answer...

Answer 8

Hey Steve, The AirLift airbags with internal jounce bumpers are not able to be added to a system without so you would need to get a whole new system. With that said the system with the internal jounce bumpers is going to create a much rougher ride…

view full answer...

Answer 9

The best set of air bags for your 2024 Chevy Silverado 2500, that are compatible with an in bed hitch, are the Firestone Ride-Rite Air Helper Springs item #F2613. These air bags have a 5,000 lbs capacity that will level out the rear end of your…

view full answer...

Answer 10

Hey Scott! The correct bearing kit for your Dexter 6k axle is the Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal #BK3-100. If you want the Dexter version it is the #DX26ER. What kind of trailer do you have?

view full answer...

Answer 11

Hey Daniel congrats on the new truck! The Lomax Stance Hard Tonneau Cover item #LOM54RV does indeed fit the 2026 Chevrolet Silverado EV with the Mid Gate. It also works with the Multi-Flex Tailgate that comes on the Trail Boss models. For a…

view full answer...

Answer 12

It sure is Doug and congrats on your new truck! The TruXedo Pro X15 Soft Tonneau Cover item #TX33TV has been confirmed to fit your new 2026 Ford Maverick. The TS Rails item #TH25FR are going to fit alongside the rails of the Pro X15 item #TX33TV on…

view full answer...

Pace Edwards Tonneau Cover and Ladder Rack that Fits 2021 Chevy Silverado 3500 Short Bed

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching