Rhino Rack 3 Bar Roof Rack that Fits 2021 Lexus GX 460

Question

Question:

Thanks for the reply. I am about to order but realized most roof racks have 2 bars instead of 3. What are the part numbers of this exact same set with only 2 bars?

asked by: Viet H

0

Expert Reply:

The components you'd need to complete a Rhino Rack roof rack on your 2021 Lexus GX 460 are part numbers # RRVA126B-3, # RRRCH6, and # RRRCP23-BK.

This does not require removal of the factory roof rails.

expert reply by: Jameson C

0

Viet H.

6/22/2021

Thanks for the reply. I am about to order but realized most roof racks have 2 bars instead of 3. What are the part numbers of this exact same set with only 2 bars?

Jameson C.

6/22/2021

For a two bar rack the Yakima Ridgeback Jetstream part # Y00425, # Y00145, and # Y28FR is also confirmed fit.

Answer 1

For your 2017 Lexus GX 460 with factory flush rails, I recommend the Rhino Rack Aero Roof Rack: Aero Crossbars - Item #RRVA126B-3, RCH Legs - Item #RRRCH6, and RCP Fit Kit - Item #RRRCP23-BK. The Rhino Rack Aero system has three aerodynamic crossbars…

view full answer...

Answer 2

The problem you are experiencing sounds like a ground issue and/or short circuit. Ground problems normally show up when there is more draw on a system such as when you have the running lights on and then use another function like a turn signal or…

view full answer...

Answer 3

Yes, the Rhino-Rack Quick Mount Legs part #RRRLT600 should work just fine with the TS (T-Slot) Rails for Truck Hero Elevate Rack System part #TH65FR.

view full answer...

Answer 4

It is possible to cut the Rhino-Rack crossbars but I do not recommend this as it will certainly void the warranty. Since we offer Rhino-Rack's Vortex Aero bars in various lengths you can simply choose the individual parts you prefer to make up…

view full answer...

Answer 5

Yes, the 63" Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount part #RTC16 can be cut down to the size you need as long as you cut them perfectly straight to allow the end caps to go back on because at this time we do not carry them as a…

view full answer...

Answer 6

Having three sets of mounting points on the flush side rails on your roof is normal. You would still only need two legs. Getting three would not increase your weight capacity on your pioneer platform. If anything, three legs would be used if…

view full answer...

Answer 7

For carrying a heavier tent like what you have I would recommend going with a three bar roof rack setup that's a fit for your 2014 Lexus GX 460 with flush rails with the Rhino Rack Vortex part numbers #RRVA126B-3, #RRRCH6, and #RRRCP23-BK. This…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to the installation instructions for the Landing Pad 30 for Yakima SkyLine And Control Towers #Y25ZR, you will have to remove the flush mounted side rails to mount the landing pads. I do have another option for you that does not require the…

view full answer...

Rhino Rack 3 Bar Roof Rack that Fits 2021 Lexus GX 460

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching