What are the Hole Diameters of the CE Smith CE20015G?
Updated 05/17/2021 | Published 05/14/2021
Products Featured in This Question
Question:
What is the diameter of center hole? 1 3/4 ?
asked by: GARY B
Expert Reply:
I contacted CE Smith to verify the sizing, and the center hole on the # CE20015G is 7/16". They also verified the 4 holes around the edges are indeed 3/8" as well. The 1 3/4" is referring to the diameter of the axle and width of the leaf spring this can be used with.
If you are looking to replace your current U-Bolt plate with this, it is also a good idea to replace the U-Bolts as well. The CE Smith # CE15285GA will pair with this plate and get everything secured. This is a single U-Bolt though, so 4 will be needed to cover one axle.
Product Page this Question was Asked From
U-Bolt Plate for 1-3/4" Diameter Axle, 1-3/4" Wide Spring - 3/8" Bolts - Galvanized
- Trailer Suspension Parts
- U-Bolt Plates
- Boat Trailer
- Snowmobile Trailer
- 2000 lbs
- Round Axle - 1-3/4 Inch
- 3/8 Inch Diameter
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Brake Controller Plug Location on 2021 Jeep Grand Cherokee
- Q&A: U-Bolts for 1-3/4 Inch Square Axle
- Q&A: What Drill Bit Size to Use to Install Redline Replacement Trailer Axle U-Bolt with Nuts # 175130
- Q&A: Can Unique Leaf Springs be Replaced on a Very Old Trailer
- Q&A: How to Measure to Determine Correct Grease Seal
- Q&A: Grease Seal Fit based on Inner Diameter and Outer Diameter
- Article: What Exactly is Tongue Weight?
- Q&A: Replacement Hub and Drum Assemblies for 2002 Escort Boat Trailer