Replacement for Furrion DV3200 & FEHS39L6A LED HD TV

Question

Question:

Hi. The Entertainment Center and TV were stolen from our 2018 Keystone Cougar XLite Fifth Wheel and need to be replaced. I would like to improve the sound quality and add SiriusXM capability. What receiver/Amps do you recommend for a wall-mounted installation? The fifth wheel has 2 zones and I may change out the stock speakers in the future.

asked by: James B

0

Expert Reply:

We do not have a entertainment center that will play DVD's and Sirius Radio. Regarding your 39" TV, the perfect replacement would be the Jensen # JEN44FR LED TV with 40" screen. This unit can accept up to three HDMI inputs and has a headphone jack for listening without disturbing or being disturbed by others, in the travel trailer.

This TV is designed for rough travel and extreme temperatures that can be found in trailers. Also includes a wall mount.

The Jensen # JTV4015DC that you referenced is basically the same unit with the higher 1080P resolution.

expert reply by: Les D

0

Answer 1

Hi Robert; do the buttons still work or is it no longer functional? You can typically still use the control panel, sometimes you can even reattach the buttons, it just won't look as pretty. The only compatible replacement is the same Replacement…

view full answer...

Answer 2

It looks like the layout of the Replacement Lippert Control Panel #LC175225 and the Power Gear 359080 is the same so I don't see any reason why these couldn't be interchanged with each other and still work. The replacement wiring harness for…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 12

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

Replacement for Furrion DV3200 & FEHS39L6A LED HD TV

Continue Researching