Does Replacement Screw and Nut Kit BD500217 Fit An Older Bulldog 12000lb 180 Series Jack?

Question

Question:

Ive got an older gooseneck with the bulldog 12 180 series and seems like one side the screw jack nut has stripped out. Is the replacement part BD500217 compatible with my jack?

asked by: Nate

0

Expert Reply:

The Replacement Screw and Nut Kit for 12000-lb Capacity Bulldog Jacks # BD500217 you were looking at is confirmed to work with your older Bulldog 12000lb 180 Series Jack on your gooseneck trailer and will replace the stripped nut currently in your jack.

I included a video of the # BD500217 for you to take a look at.

expert reply by: Samuel C

0

Answer 1

The Replacement Handle Shaft for etrailer and Ram Square, Direct Weld Jacks - 10,000 lbs #TJD-12000-SHABUS although not a direct replacement is my recommendation for your Fulton Jack. We don't have the replacement parts you described, but this…

view full answer...

Answer 2

The Pollak switch part #PK34513 that you referenced would be a great option, but I'd rather recommend you go with the Buyers Products Toggle Switch with 2 Blade Terminals - Recessed Panel Mount #337SW911 as this setup was made for your exact…

view full answer...

Answer 3

We may be able to help you find the replacement parts you need for your 12K-rated Fulton jack but a part number for the jack and a photo would help. I did check all 12K-rated jacks and landing gear that we carry and none is the Fulton brand. I did…

view full answer...

Answer 4

Hello Craig. We do offer the #BD500212 gear kit, but sadly the 001015 bearing is no longer available. We sold our last one about a year ago and we will not be getting more stock.

view full answer...

Answer 5

I have attached a photo that has been expanded so you can see what the part #BD500217 jack screw and nut look like. I have also included a photo with the kit that has the dimensions noted you can check out.

view full answer...

Answer 6

Hey Matt we still have that screw kit. It is the Replacement Jack Screw and Nut Kit for Bulldog Sidewind Trailer Jacks item #BD500217. This is designed to fit Bulldog series 182 jacks from 2003 to present with a 12,000 lb capacity. I have linked a…

view full answer...

Answer 7

The crank for the Bulldog Square Jack #BD182815 is sold separately. You would want a Replacement Bulldog Sidewind Jack Crank Assembly w/ Horizontal Clevis #BD800090 if you would like a horizontal clevis or a Replacement Bulldog Sidewind Jack Crank…

view full answer...

Answer 8

We do have a large selection of replacement crank handles for sidewind trailer jacks available. The best way to pick out a replacement will be to determine the manufacturer or model of your existing trailer jack. I have attached a link that will take…

view full answer...

Answer 9

I have a replacement jack option for you, I reached out to my contact at Fulton and the Fulton Magnum Series 12000lb got discontinued a few years back, and all of the rebuild kits and replacement parts were discontinued with it. The only option is…

view full answer...

Answer 10

For the Bulldog 12K jack you will need to replace the entire jack with #BD182701 if the inner tube is damaged. The other option if it is not damaged is simply to replace the screw and nut #BD500217 which will replace the inner working of that inner…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Does Replacement Screw and Nut Kit BD500217 Fit An Older Bulldog 12000lb 180 Series Jack?

Featured Help Information

Miscellaneous Media

Continue Researching