Replacement Shroud For A Coleman-Mach Air Conditioner On A 2000 Tioga Motor Home

Question

Question:

2000 tioga motorhome has coleman mach shroud for roof air conditioner. model 8335-8966 off faded plate. i need replacement. does etrailer have one?

asked by: David L

0

Expert Reply:

The replacement shroud you need for your Coleman-Mach air conditioner on your 2000 Tioga motor home is the MaxxAir Replacement RV Air Conditioner Cover - Coleman-Mach / RVP Brand RV Air Conditioners Item # MA8335A5261.

expert reply by: Shane H

0

Answer 1

As far as refrigerator vents, we carry 2 options. Those are the Camco RV Refrigerator Vent Cover - Base Only #CAM42161 (white) or #CAM42164 (black). These models both have external dimensions of 26-1/4" long x 7-3/8" wide x 1-3/4" tall…

view full answer...

Answer 2

The Coleman 7333C8876 will need the MaxxAir TuffMaxx Replacement Shroud - White #MA00-325001 based on my research because that unit can be interchanged with a Coleman Mach 3. I've attached a diagram of the shroud measurements and a video to…

view full answer...

Answer 3

Based on the research I've done, it sounds like you 1986 Winnebago LaSharo has an older Coleman Mach 3 series AC unit. So the correct replacement shroud is the MaxxAir TuffMaxx Replacement Shroud for Coleman-Mach RV Air Conditioners #MA00-325001.…

view full answer...

Answer 4

The the MaxxAir shroud part #MA00-325001 is a fit for the Coleman Mach, Mach 1, Mach 3 and Mach 15 models and mounts like the original and includes mounting hardware and instructions. Mach is an entire model line of Coleman air conditioners and Mach…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement Shroud For A Coleman-Mach Air Conditioner On A 2000 Tioga Motor Home

Featured Help Information

Miscellaneous Media

Continue Researching