Fitting to Allow Your Grill with Type-1 Connector to Connect to Standard 1 Pound Cylinder.  

Question:

Expert Reply:

Thanks for the picture of what you need. I see your grill came with a special regulator that has an inlet for a 1-pound propane bottle and a quick connector on the other side. This unit is not something that we sell.

The closest thing we have to that is a MB Sturgis # 108072 Single-Stage Propane regulator with one inlet and one outlet which are both 1/4" Female NPT.

On inlet side you could attach the JR Products # 37207-30185 adapter which will attach to your 1 pound propane cylinder.

On the outlet side you can attach the Camco # CAM59853 Quick-Connect Kit which has a quick connect that attaches to your grill and on the other side has a 1/4" female NPT.

The one issue is the connectors between the regulator and quick connect kit are both 1/4" female NPT. To connect these you will need a 1/4" male hex nipple. You can pick up one at any large hardware store.

All of these threaded joints (except the propane cylinder) will require the JR Products # 37207-30025 Thread Sealant Tape. The regular white tape for water joints is not good enough.

expert reply by: Les D

0

All-In-One Regulator with Quick Connect and 1 Pound Bottle
(click to enlarge)