70 inch Crossbar Roof Rack for 2021 Toyota 4Runner with Raised Rails

Question

Question:

Hi, Im a paddler that regularly carries 2 or 3 canoes Im shopping for vehicles and racks. Looking at a 2021 Toyota 4Runner. Would like to put Thule square bars or other suggested bars on factory roof rails or mount similar support system using 4runner mounting points to support two 72 wide bars. Will this work or do you have another suggestion. one concern is how far back on the vehicle the racks are placed. Thanks,

asked by: Elliott

0

Expert Reply:

Yakima has their Jetstream roof rack that fits your 2021 Toyota 4Runner with raised roof rails. To do a 70 inch crossbar setup you'd need two of the crossbars # 8880653 and the tower kit part # Y33TR and you'd be set.

There isn't a square bar setup that would fit and be the length you want.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hey Jason, whenever available I would recommend going with the channel attachment for roof rack accessories including the Thule Hullavator part #TH898 as its simpler stronger, and it's basically the future of most roof rack accessories as it…

view full answer...

Answer 3

Hello Scott, Great question. Since you’re currently running two Interstate SRM-24 batteries in parallel, the 24M-EFB would be a nice direct replacement. It’s still a Group 24 battery, but it’s maintenance-free and generally offers better cycle life…

view full answer...

Answer 4

It looks like the Curt Trailer Hitch Receiver #C13366 is for the 2018-2020 Volkswagen Atlas but then the Curt Trailer Hitch Receiver #C24ER took over starting with the 2021 model. They look very similar but the dimensions won't be the same which…

view full answer...

Answer 5

When comparing the height of each option, the lowest Yakima Roof Rack for your vehicle consists of the Yakima RoundBar SL Adapter #Y03536 to utilize your previous Yakima round bars, the BaseLine Towers #Y28TR, the BaseClip Fit Kit #Y06130 and…

view full answer...

Answer 6

Yes, the Thule AirScreen Fairing #TH82WV is compatible with the Yakima JetStream crossbars. The fairing is compatible with aero-style bars that are no more than 3-1/4" long x 1-1/8" tall. Since the JetStream bars measure 3-1/8" wide x…

view full answer...

Answer 7

The Yakima JetStream crossbars have a T-slot that is 1 inch wide and 1/2 inch tall so any t-bolt used would have to fit within those measurements. The 4-bolt set of M10 x 1.5 x 25 bolts #Y8880184 will work since the head is 3/4 inches square but I…

view full answer...

Answer 8

The closest solution I can come up with for a longer bolt than the Thule Replacement Stainless Steel T-Bolt #853-5648 is going to be the Yakima Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers #Y8880184. This replacement bolt has the…

view full answer...

Answer 9

The difference between Landing Pad 1 #Y00221 and Landing Pad 4 #Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different…

view full answer...

Answer 10

We do have an option that will allow you to mount long crossbars on your roof with tracks. This application requires drilling. For that setup, I recommend the following parts: - Yakima 42" Tracks for Roof Racks #Y01126 - x4 of the Yakima Control…

view full answer...

Answer 11

Hey Chris, To connect your Rhino Rack crossbars to the t-slots of a Pace Edwards UltraGroove Retractable Hard Tonneau Cover #311-KED7936 you'd need the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars #RRRLT600H.

view full answer...

70 inch Crossbar Roof Rack for 2021 Toyota 4Runner with Raised Rails

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching