Outer Casing Measurements for the Demco Hydraulic Brake Actuator
Updated 02/16/2021 | Published 02/12/2021
Question:
What is dimensions for part ? I need 20 in long 4.5 in w and 6 in high.
asked by: Victor M
0
Expert Reply:
The outer casing of the Demco Hydraulic Brake Actuator - Drum - Primed - 12" Adjustable Channel Down - 20,000 lbs, part # DM8203332, measures at 19-3/4" long (just 1/4" off of yours) x 4-1/2" wide and 6" tall. It looks like this fits your current one almost perfectly (it's easy to be off 1/4" in measurements).
If you have any other questions, please let me know and I will help you further.
expert reply by:
Kef G
0
Product Page this Question was Asked From
Demco Hydraulic Brake Actuator - Drum - Primed - 12" Adjustable Channel Down - 20,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Construction Trailer
- Farm Trailer
- Weld-On
- 20000 lbs GTW
- Channel
- 3 Inch Channel Tongue
- Drum Brakes
- No Lockout
- Demco
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Is the 3,500 lb Rating for Curt C80136 Safety Cables Per Cable or Per Pair?
- Q&A: Hardware Typically Used to Install A-Frame Trailer Jack
- Q&A: Recommended Replacement For A Trimark 030-1000 RV Entry Door Lock
- Q&A: Bolt Hole Spacing for the Demco Hydraulic Brake Actuator
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Comparing Bypass and Non-Bypass Electric Reverse Lockout Solenoids for Surge Couplers
- Q&A: Reverse Lock Out Solution for Demco Actuator DA10
- Q&A: Recommended Replacements for Tie Down Engineering Model 20 Actuator