Distance From Mounting Plate Bolt Hole to End Of Receiver Tube on Curt 13250 and 14250 Hitch

Updated 01/29/2021 | Published 01/26/2021

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(29)

$271.32

Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"

(20)

$303.47

Question:

Hi. I need the depth dimensions of items # 13250, and # 14250. I need to know how far they stick out from the rear of the vehicle. A measurement from one of the mounting holes to the tip of the receiver would work. I have a clearance concern due to a wheelchair lift on the vehicle. 2006 Sprinter 2500 118wb. Thanks

asked by: Thomas R

Expert Reply:

The Curt # 13250 has a length of 13-1/2" from the center of the first bolt hole on the mounting bracket to the end of the receiver and the # 14250 has 14" with the same measurement. I've also linked photos of these with those dimensions illustrated for you to have a look at.

If there is a specific length you're seeking, just let me know and I can see if there is anything we have that will work. I've also linked an installation video of the # 13250 for you to have a look at, where it provides some measurements that you might find helpful as well.

expert reply by: Erik B