Replacement Mounting Clamps For TruXport Tonneau Cover On 2017 Toyota Tacoma W/ Deck Rails

Question

Question:

Hi- Regarding Part number TX1703561, replacement clamps for Truxedo truxport tonneau covers: Will these fit my 2017 Tacoma with deck rails? If not, do you offer replacement clamps that will fit? Thanks so much for your time. Denise

asked by: Denise G

0

Expert Reply:

I have another option but the Replacement Mounting Clamps for TruXedo Tonneau Covers # TX1703561 you were looking at will not work with the deck rails on your 2017 Toyota Tacoma.

Since you have deck rails you need the Replacement Mounting Clamps for TruXedo TruXport Tonneau Cover # TX27FR.

expert reply by: Samuel C

0

Answer 1

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 2

Hey Scott, congrats on the new truck. I checked with Timbren's website and they do not go into specifics on how many spacers or what size you're going to need. The instructions for the Timbren Suspension Enhancement System item #T45MR say to…

view full answer...

Answer 3

I checked with Timbren, and the overall height (from the top of the bracket that bolts to the frame to the bottom of the spring) is 6 inches for the Timbren Suspension Enhancement System #T45MR.

view full answer...

Answer 4

The Replacement Mounting Clamps #TX27FR for TruXedo TruXport Tonneau Covers on newer Tacomas. For your 2008 Toyota Tacoma you will want the Clamps #TX1703561.

view full answer...

Answer 5

The Replacement Mounting Clamps for TruXedo Tonneau Covers #TX1703561 that you referenced are what you need. These are the clamps that fit the Truxport tonneaus like you have and are designed for the applications that do not have deck rails like you…

view full answer...

Answer 6

The Erickson clamps #EM09450 are only 2-1/2 inches tall to being with and even though they could likely open up enough you would probably need longer hardware. That is why I would go with #EM09453. Its a larger set of clamps with longer hardware to…

view full answer...

Answer 7

I contacted Trimark in regards to a replacement part for the Trimark 030-0900. 030-0900 is actually a series number not a specific part number. To find the part number you will need to take the interior handle completely off the unit. On the back…

view full answer...

Answer 8

The Replacement Mounting Clamps for TruXedo Tonneau Covers part #TX1703561 that you referenced are designed specifically for the TruXedo TruXport tonneau cover systems. We do not carry or stock GM tonneau covers therefore would not be able to confirm…

view full answer...

Answer 9

I have attached below the dimensions for the Erickson Clamps for Truck Bed Toppers part #EM09453 at max opening.

view full answer...

Answer 10

The amperage that the Solera Power Awning Replacement Motor #LC266149 draws will vary based on the awning length and if it is rolling in our out. The motor will pull no more than 15 amps at any given time. When the motor is being wound in it will…

view full answer...

Replacement Mounting Clamps For TruXport Tonneau Cover On 2017 Toyota Tacoma W/ Deck Rails

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching