Replacement A Frame Surge Coupler
Updated 11/11/2020 | Published 11/09/2020
Question:
I need to replace surge actuator on a Wells Cargo RFV 7x12 trailer, Currently the one there is a weld on.
asked by: David D
1
Helpful Expert Reply:
The Demco Hydraulic Brake Actuator w Drop part # DM8759812 uses a 2-5/16" Ball and a 8000lb. capacity.
After removing your old coupler this one can easily be welded back on in the original position.
expert reply by:
Randy B
1
Product Page this Question was Asked From
Demco Hydraulic Brake Actuator w Drop - Drum - Primed - A-Frame - 2-5/16" Bulldog Coupler - 8K
- Brake Actuator
- Surge Brake Actuator
- Farm Trailer
- Boat Trailer
- Construction Trailer
- Travel Trailer
- Utility Trailer
- Weld-On
- 8000 lbs GTW
- 2-5/16 Inch Ball Coupler
- 3 Inch Channel Tongue
- Drum Brakes
- No Lockout
- Demco
more information >
Continue Researching
- Q&A: What Bracket Kits Will Allow CE 19504-2 Fenders To Mount To Shorelander Boat Trailer?
- Q&A: Hardware for Installation of CE Smith Single Axle Trailer Fenders
- Q&A: What mounting hardware would I need to install CE Smith Single Axle Trailer Fenders?
- Q&A: What Wire Gauge Is The TowSmart 16 to 18 Gauge, 4 Conductor Wire?
- Q&A: How Does the CE Smith Single Axle Trailer Fender Attach to the Trailer?
- Q&A: Replacing A-Frame Surge Brake Actuator On 1966 Scotchman Camper
- Q&A: Tire and Wheel Size to Replace 18.5x8.5-8 on Trailer
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision