What is Static Weight Capacity of Yakima Outpost HD Rack

Question

Question:

Max static weight for a Roof Top tent

asked by: Terry P

0

Expert Reply:

The Yakima OutPost HD Mid-Height Truck Rack w/ 78" HD Crossbars # Y01152-59 has a static weight capacity of 800 lbs. I attached a picture that shows all of the weight capacities for the rack for you to check out as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The carrying capacity of the Thule Xsporter ladder rack #TH500XT is 450 pounds which will be 50 pounds less than what you need. For a 500 pound capacity rack we have some options from Access. For an 8 foot bed use #A70590. And for the 5-1/2 foot bed…

view full answer...

Answer 2

For your 2014 Toyota Tacoma both the TracONE Truck Bed Ladder Rack, part #TH27000XT, and the Thule Xsporter Pro, part #TH500XT are confirmed as a fit. If you are not planning on carrying extremely heavy loads I recommend the Thule Xsporter, part…

view full answer...

Answer 3

The 450-pound load capacity listed on the Thule Xsporter #TH500XTB-THXK4B is for the dynamic weight. I called my contact at Thule, and he confirmed that the static weight capacity of the Thule Xporter is about 800 pounds. If you need a tent…

view full answer...

Answer 4

I spoke with a representative of Thule, who told me that they did not classify the 450 lb weight capacity of the Thule XSporter #TH500XT as either static or dynamic and that you only needed to have a capacity of less than 450 lbs and you would be…

view full answer...

Answer 5

You can definitely use the Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack #TH500XT to transport and use your rooftop tent on your 2019 GMC Canyon. I reached out to my contact at Thule who confirmed that your estimated 500 lbs of weight…

view full answer...

Answer 6

We do offer the Thule Xsporter Pro Adjustable-Height Truck Bed Ladder Rack #TH500XT and this rack system will fit your 2012 Ford F-150 whether it has a 5-1/2-, 6-1/2-, or 8-foot bed length. The linked video illustrates the features and construction…

view full answer...

Answer 7

The ladder rack for your 2013 Toyota Tacoma that is a confirmed fit is the TracRac T-Rac G2 Truck Bed Ladder Rack, part #TH37004XT. This system includes 4 heavy-duty aluminum load stops that fit in the T-slots on the crossbars and also includes 4…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

What is Static Weight Capacity of Yakima Outpost HD Rack

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching