Fit of Draw-Tite # 41932 Class IV Receiver Hitch on 2000 GMC Sierra 2500LD

Question

Question:

Purchased 41932 hitch for 2000 G.M.C. 2500LD club cab short bed will it fit ?????

asked by: jim m

0

Expert Reply:

According to Draw-Tite, their Class IV receiver hitch part # 41932 is indeed a fit for the 2000 GMC Sierra 2500LD truck, as long as your truck has the OEM bumper and brackets.

To see installation details, click the provided link.

expert reply by: DeAnne T

0

Answer 1

The Curt #C15323 installs to the underside of the frame members as shown in the provided diagram. You'll want to make sure the rear frame members where the hitch would install are still sound. Some surface rust is normal, but if it's any…

view full answer...

Answer 2

The 2 bolts that go into the bumper portion of the Curt Trailer Hitch Receiver #C14332 are a required part of the installation. Curt will void any warranty on the hitch if it is not installed properly as per their instructions. There is no way to…

view full answer...

Answer 3

Yes, the Curt Trailer Hitch Receiver #C15323 will fit on your 2005 Chevrolet Silverado 1500. This receiver is designed to fit the standard factory bumper but does not screw into the bottom of the bumper.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

Hi Stephanie! Great question and you’re totally right to ask, because most hitches for the 2024 RAV4 do require a bit of bumper trimming. That includes the Oris Detachable Hitch #TS66VR, since it uses a hidden design that needs a hole cut in the…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Fit of Draw-Tite # 41932 Class IV Receiver Hitch on 2000 GMC Sierra 2500LD

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching