Availability of Hub/Drum for 8k Axle with Grease Instead of Oil Bath
Updated 09/02/2020 | Published 09/01/2020
Question:
Can i get this hub thats not oil filled need regular grease bearing hub
asked by: Jeff B
0
Expert Reply:
We have the Dexter hub part # 8-285-11UC3 which is an 8k trailer hub with an 8 on 6-1/2 inch bolt pattern that uses grease instead of oil bath.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 8,000-lb E-Z Lube Axles - 12-1/4" - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- 25580 / 02475
- Standard Grade
- For 8000 lbs Axles
- 9/16 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Hub And Drum Replacement for 90865 Rockwell Hub and Drum
- Q&A: Does the Lippert Hub and Drum Assembly LC57DX Take a Threaded Grease Cap?
- Q&A: How Much Does The TA35ZR Taskmaster Modular Wheel Weigh?
- Q&A: Correct Replacement for Kwikee Series 23 Steps Model 902308000
- Q&A: Are Double Eye Leaf Springs Rated For 8,000 lb Axles
- Q&A: Soft Start Recommendation for 13K Bu Furrion Chill HE AC Unit
- Q&A: How To Properly Lubricate A Curt Q20 Fifth Wheel Trailer Hitch
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Gooseneck to 5th Wheel Adapters
- Article: Slipper Spring Trailer Suspension System Review
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Best Vehicles to Flat Tow Behind an RV