How to Remove Wiring Harness from 90195 Tekonsha P3 Brake Controller
Updated 05/23/2020 | Published 05/21/2020
Question:
How do you remove the wiring harness from module
asked by: Ross H
1
Helpful Expert Reply:
You can detach the harness from the Tekonsha P3 brake controller by gently pulling up on the tab shown in the photo while pulling rearward on the connector. You'll want to do this gently, so the tab doesn't break. The same holds true for all the Tekonsha brake controllers.
expert reply by:
Mike L
1
click to enlarge
Continue Researching
- Shop: Brake Controller
- Article: How to Measure for Trailer Hitch Drop
- Q&A: How Does Brake Controller Install in Tiffin Phaeton 40AH
- Q&A: Comparing Aluma-Tow Adjustable Ball Mount To B&W, etrailer, and Trimax
- Q&A: Recommended Trailer Wiring and Brake Controller for a 1999 Dodge Ram 2500
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Can Redarc Tow Pro Liberty Brake Controller Install 2012 Toyota Sienna LE
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: How To Turn Off The Tekonsha Prodigy P3 Brake Controller # 90195
- Q&A: How To Tell Apart 5,200 lb, 6,000 lb and 7,000 Axles
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Determining Trailer Tongue Weight
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
- Article: 5 Things to Know About Weight Distribution Hitches