What is the Length of Replacement Double T-Slot Crossbar for TracRac TracONE Ladder Rack

Question

Question:

How long is this bar? Can’t find it in the listing.

asked by: Nate W

0

Expert Reply:

I reached out to Thule for you and confirmed that the overall length on the Replacement Double T-Slot Crossbar for TracRac TracONE Ladder Rack part # TA8523447003 is 64".

expert reply by: Randy B

0

Answer 1

I went down to the shop and double checked the crossbars and found that Thule made the mounting track on the bottom of the crossbar for the Thule TracRac TracONE Truck Bed Ladder Rack #TH27000XTB just different enough that it won't allow you flip…

view full answer...

Answer 2

We have LED trailer lights available. If you have the dimensions of the light you want to replace that would help in finding the right replacement for your Pacific trailer. From my research I found that some of the Pacific trailers use part #STL42RB.…

view full answer...

Answer 3

The light dimensions of the Optronics LED #TLL12RK are 7-9/16" long x 2-3/4" tall x 1-3/4" deep and the hole size needed is 6.75" by 2.5 inches. I confirmed this with my contact at the manufacturer and I've attached a template…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Rick, thanks for the pictures. Sounds like a tough situation but congrats on your new truck. The base rails can be cut on the Thule TracRac SR Sliding Truck Bed Ladder Rack item #TH43003XT-501. This will allow you to install the rack on your 2026…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Todd! Yes, the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters #Y01151-5755 is compatible with the Synetic MR Retractable PRO Tonneau Cover on your 2025 Toyota Tacoma. The adapters will fit the T-slot rails on that…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 10

Hey Brett, the best option we have would be the Yakima Overhaul HD part #Y01151-5768 which is an adjustable height ladder rack that attaches to the utility track you have above the storage containers in the bed of your 2022 Toyota Tacoma Trail…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

What is the Length of Replacement Double T-Slot Crossbar for TracRac TracONE Ladder Rack

Product Page this Question was Asked From

Continue Researching