Replacement Gas Regulator for Atwood 91043 Water Heater

Question

Question:

This is what is in my camper and needs to be replaced. Do you have one there and if so how much? 37c14u-5 atwood n0.mpd-91043 l.p. regulator 10.0 w.c.

asked by: Anthony D

0

Expert Reply:

The Replacement Gas Regulator for Atwood Gas RV Water Heaters # 91602 will actually be a direct replacement for your Atwood 91043 water heater. Current pricing can be found directly on the product page.

expert reply by: Jon G

0

Answer 1

The Replacement Gas Regulator for Atwood Gas RV Water Heaters #91602 is the correct replacement for your Atwood 91043. It will be a direct replacement.

view full answer...

Answer 2

The Replacement Gas Regulator for Atwood Gas RV Water Heaters part #91602 will be a direct replacement for the Atwood 91043. It comes with everything shown in the photos on our product page, the valve/regulator and two fittings.

view full answer...

Answer 3

To replace your Atwood Gas Regulator number MPD-91043 you can now use the Atwood #91602 regulator. It could be a bad thermocouple. If you can remove the thermocouple and give me a measurement of the element I can recommend a universal replacement.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

The RV Propane Gas Detector part #RS64FR is what I recommend using to replace the the Atwood RV Propane Gas Detector part 31013 (Discontinued). The mounting plate for this new detector will cover up any holes you had for the previous so it will be a…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Replacement Gas Regulator for Atwood 91043 Water Heater

Continue Researching