Replacement Hitch Mounting Bolts for Hitch Install on 2005 Hyundai Santa Fe

Published 04/01/2020

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(322)

$237.71

Battery Post and Terminal Cleaner - Wire Brush

(15)

$4.56

Question:

I have a 2005 Santa Fe. I bought a used hitch with 6 holes. The two rear are same as tow hook but the one towards front are bigger. What size please and thanks

asked by: Ken

Expert Reply:

Do you know which hitch you have? There should be a sticker on it with a part number. The Curt # C13073 you'd looked at would be a fit for 2010-2013 Hyundai Santa Fe models and wouldn't fit your vehicle.

On your model year, the larger front-most holes closest to the front of the vehicle are M12 x 1.25 x 40mm Class 10.9 Hex Bolts which use a 1/2 inch conical toothed washer and the remaining bolts closer to the rear of the vehicle are M10 x 1.25 x 40mm Class 8.8 hex bolts which use a 3/8 inch conical toothed washer.

Due to the age of the vehicle, there will likely be quite a bit of road gunk and corrosion built up into the nuts that are welded up into the frame member. I'd recommend giving those a good shot of a spray lubricant like WD-40 and a good scrub with a battery terminal cleaning brush like # DW00254. If the corrosion is really severe, you'll need a thread tap for the M10 bolts and the M12 bolts.

I've linked you to an installation video for the hitch I mentioned that fits your Santa Fe.

expert reply by: Mike L