Slide Topper for 84-1/2 Inch and 149-1/2 Inch Flange to Flange Measurement

Updated 03/05/2020 | Published 03/04/2020

Products Featured in This Question

Solera RV Slide-Out Awning - 85" Wide - White

(1412)

$462.44

LaSalle Bristol Butyl Tape for XTRM RV roof membranes - 30' x 3/4" - Gray

(183)

$26.28

Solera RV Slide-Out Awning - 151" Wide - White

(1412)

$663.39

Solera RV Slide-Out Awning - 151" Wide - Black

(1412)

$700.39

Solera RV Slide-Out Awning - 85" Wide - Black

(1412)

$447.96

Question:

I have two slides that measure outside of flange to outside of flange as follows: 1st is: 84.5” 2nd is: 149.5” Can you please let me know which slide topper is best for these dimensions. Should you have 2.5-3” of overhang of fabric on each side? Also, I would need the rail for each to attach to camper body side, can you send me a part number for these as well. In addition, please let me know the best weather type tape to use, part number would be great. There is 3.5” from top flange to top of trailer, I believe this will still allow enough fall over topper so water does not sit on top. Please advise. Camper is a 2013 Surveyor SV305 If you can send pricing that would be great too. Thanks

asked by: Shawn B

Helpful Expert Reply:

We have exactly what you need, with the Solera RV Slide-Out Awning and does include the rail, and I'll give you the part numbers based on your measurements.

- 84-1/2": Solera RV Slide-Out Awning # LCV000165062 (Black) or # LCV000163287 (White)
- 149-1/2": Solera RV Slide-Out Awning # LCV000165061 (Black) or # LCV000163299 (White)

In addition, the 3-1/2" you mentioned is plenty for the slide topper for water will not sit on top. For weather tape (butyl tape) you can use the Butyl Tape # 344270341410-1.

All prices are on the product pages for you, and I have also linked a video review for you to check out.