Replacement Center Plug For Kodiak Oil Bath Caps
Published 01/10/2020
Products Featured in This Question
Question:
I have the oil bath caps on my kodiak 10,000 disc brakes I bought from etrailer a couple years ago they work great but I accidentally misplaced the rubber center plug. Do you have a replacement?
asked by: Mark
0
Expert Reply:
Mark, it sounds like you misplaced the rubber center plug for the oil cap part # K1014PCAP from your Kodiak 10,000-lb Disc Brake Kit part # K2HR958QD11. I recommend Replacement Center Plug for Kodiak Oil Cap part # KO54FR to replace it.
expert reply by:
Heather A
0
Product Page this Question was Asked From
Replacement Oil Cap for Kodiak 10,000-lb Disc Brake Kits
- Trailer Bearings Races Seals Caps
- Caps
- Oil Cap
- 3.63 Inch O.D.
- 3.63 Inch
- 7000 lbs Axle
- 7200 lbs Axle
- 8000 lbs Axle
- Kodiak
more information >
Continue Researching
- Q&A: Do You Have a 2-inch Square Axle Rated for At Least 3,000lbs and Has Idler Hubs?
- Q&A: Can Two Batteries Wired In Parallel Receive a Charge at the Same Time
- Q&A: Recommended Aluminum Oil Cap Cover to Replace a Dexter 21-88
- Q&A: Replacement Grease Seal for 9,000 Lbs Axle with Kodiak Disc Brakes
- Q&A: Oil Bath Hub Oil Cap for Pre 1996 Quality Axles 3-1/2 x 14 Thread Pitch
- Q&A: Is There a Cross-Reference for a Kodiak 12" Trailer Brake Rotor
- Q&A: Bolt Pattern of 5 Bolt Brake Mounting Flange for Trailer Brakes
- Article: Most Popular Wheel Bearings
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
- Article: Performance Chips and Modules
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)