Installation Position Of Anderson 3200 Fifth Wheel Rail Hitch

Question

Question:

Do the short posts on the rail closer to the cab or the tailgate

asked by: Cheryl J

0

Expert Reply:

The short legs of the Andersen Ultimate Connection 5th Wheel Trailer Hitch # AM3200 are located closer to the tailgate per the included diagram from their installation instructions. This design helps to aid in providing the additional turning clearance.

I included a great overview video for review as well.

expert reply by: Patrick R

0

click to enlarge

Denny

3/21/2024

Where is the model number located on this hitch?

Reply

Jenny N.

4/10/2024

@Denny Denny, that is a great question. The model number will be on a sticker that is located on the base tubing on the unit, It would have a sku number listed with the model number. In the event that the sticker is not there you can measure the height of the unit from the base rail to where the ball sits [ do not include the ball ]. If it measures 13 inches then it is model number 3200. If it is 15 inches and is all aluminum then it will be 15 inches. The newest Gen 3 models which have been released this year [ 2024] will measure 14 inches for both models. The 3200 will be the black power coated model and the 3217 will be the silver aluminum model. We currently only carry the 3200 model on the site.

Reply

Answer 1

With a 2022 F350 short bed, hitting the top of the bed rails should not be an issue with most campers. Turning clearance however, will certainly be a factor. That is one advantage of the Andersen Ultimate hitch #AM3200, as it provides a 9"…

view full answer...

Answer 2

I can definitely help with that, Larry! There are differences between the Roadmaster Comfort Ride Kits #RM-2460-2580-3 #RM69NQ and #RM-2460-2570-3 and I have them listed below. They all include the Comfort Ride Shock Absorbers for Tandem Axle…

view full answer...

Answer 3

Hi Doug! If you were just needing a weight distribution system for the sway control, I would have said the Andersen Weight Distribution Hitch w Sway Control - 6" Drop/Rise - 14K GTW, 1.4K TW #AN53VR could be a good option. However, I have tried…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Hey Daren, thanks for reaching out! The Curt 4" Offset Ball #C602 is rated for 20,000 lbs towing and has the 5,000 lb vertical load capacity. That 10,000 lb rating is an extension of our facet system that helps with filtering, but I've asked…

view full answer...

Answer 6

Hey there Layla! There are a few different forms of weight distribution hitches, but the majority of the systems that have sway control use friction bars, which work similar to brake pads on your vehicle. This works really well, but it can sometimes…

view full answer...

Answer 7

Good afternoon Drake! Yes you are in luck, because the Andersen Weight Distribution Hitches, like a lot of modern ones, do allow you to reverse while hooked up to your trailer. The reason this can, and some can't, comes down to if it uses certain…

view full answer...

Installation Position Of Anderson 3200 Fifth Wheel Rail Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching