No Sound From Jensen Stereo While Hooked Up to TV Via AUX Port
Updated 09/23/2019 | Published 09/20/2019
Question:
I have a Jensen tv and a Jensen stereo dvd system, I connected an audio cable from output jacks on my tv to input jacks on the stereo and set the stereo to aux 1. I am getting no sound with tv speaker turned off. What am I missing? Thank you
asked by: Lola
Expert Reply:
I spoke with Jensen and they informed me that the issue you are having is usually caused by an incorrect setting on the stereo so the good news is that it should be a simple fix. In order to do this you will need to go into the audio settings on the stereo and change the AUX Input from variable to fixed after you have turned off the speakers on the TV.
If the above does not fix your issue then you will need to reach out to the manufacturer and have them walk you through the troubleshooting steps.
Continue Researching
- Q&A: Recommended Replacement Stereo for Jensen AWM970
- Q&A: Best Replacement for Linear Series RV5090 RV Stereo
- Q&A: Best Replacement for a Jensen RV Stereo AWM910
- Q&A: Recommended Replacement For A Magnadyne RV5090 RV Stereo System
- Q&A: Recommended Replacement for Old Jensen JWM6A RV Stereo
- Q&A: Recommended Replacement For An Estone RX8500 RV Stereo
- Q&A: Replacement RV Stereo Recommendation for a Genesis GT/ 2.0
- Article: Holiday 2025 | Staff Picks for Real-Life Adventures
- Article: Ram Trailer Tow Prep Package
- Article: How to Raise Your Travel Trailer Height
- Article: How Much Solar Power Do I Need For My RV?
- Article: Which RV Propane Tank Size Do I Need?
- Article: Trailer Lighting Requirements
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)