Is Dexter 8-285-11UC3 Brake Drum Compatible with Hydraulic Trailer Brakes
Updated 09/14/2019 | Published 09/13/2019 >
Products Featured in This Question
Question:
I am switching my trailer to hydraulic brake assemblies. Will the same drum work that was on the electric assemblies?
asked by: Pat
0
Expert Reply:
The Dexter # 8-285-11UC3 brake drums are indeed compatible with either electric or hydraulic brake assembles. Your existing drums would work perfectly with the # 23-402-403 Dexter Hydraulic Drum Brake Kit. I would recommend that you inspect the inside diameter of the drums to make sure they are smooth and in good shape.
expert reply by:
Mike L
0
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 8,000-lb E-Z Lube Axles - 12-1/4" - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- 25580 / 02475
- Standard Grade
- For 8000 lbs Axles
- 9/16 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Hub And Drum Assembly For An 8 Lug Hub With 9/16" Studs
- Q&A: Replacement Bearing Kit for a # 42 Spindle on a 8,000 lbs Axle
- Q&A: Replacement Brake Assemblies for Trailer with 6,000 lb Dexter Axles
- Q&A: Replacement Electric Brakes For A 2023 Brinkley Z 3100 5th Wheel With 7k Axles
- Q&A: What Spindle Fits the Trailer Hub # AKHD-865-8-EZ-K
- Q&A: Recommended Valve Stem For 125-130 PSI And TPMS Sensors
- Q&A: Hub And Drum Replacement for 90865 Rockwell Hub and Drum
- Article: Aftermarket Brake Control Wiring for 07-13 GM Full-Size Truck with Factory-Integrated Brake Control
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)

