Safety Chains for 2011 Forest Rive Flagstaff Mac Pop-Up Camper

Question

Question:

I am looking to replace the safety chains on my 2011 Forest River Flagstaff Mac pop-up camper. I believe the max gross weight is 3000 lbs, but am not sure what length/size I need. I have it in storage right now or I would measure and check it myself. Thanks for any help you can provide.

asked by: Steve

0

Expert Reply:

Based on my research your 2011 Forest Rive Flagstaff Mac pop-up camper does have a 3,000 lb GVWR like you mentioned. For safety chains a great option will be the Curt Single Hook, Coiled Safety Cables with S-Hooks - 42" Long - 3,500 lbs # C80136.

I've added a link to a video review of these chains for you to check out as well.

expert reply by: Kyle S

0

Answer 1

Since safety chains pivot underneath the trailer when making turns it's typically not a situation where a significant length of safety chain is needed to allow sharp turns to be made. Basically you'd want to measure the distance between the…

view full answer...

Answer 2

Since Toyota Camry's aren't meant for towing there isn't a confirmed fit for towing mirrors, but you could use a universal fit tow mirror like the K-Source Universal Towing Mirrors #KS69ZR. Note: Your mirror will need to be 4-1/2" to…

view full answer...

Answer 3

I contacted the manufacturer and they were able to inform me that the 3/8" Quick Links #37201335 have a working load limit of 2,750 lbs. and a min. breaking limit of 6,875 lbs.

view full answer...

Answer 4

The main difference between the Redarc Liberty #RED24FR and Elite #RED44FR is the Elite allows you to switch from proportional braking to a user controlled mode which is more like a timed brake controller. The Elite also allows you to control up to 3…

view full answer...

Answer 5

Hey Bill! The Replacement Inner Member for Dexter DX7.5L Actuator #DX99FR will work just fine for your setup, especially since you've already been using the 34044 anyways. Are you just needing the replacement inner member? Or are you needing to…

view full answer...

Answer 6

Hey John, since you have a UFP A-60 surge coupler we have just the inner member with the part #DX39FR or if you want the entire replacement coupler/actuator you'd instead want the part #DX63FR. Both of these are designed for 2 inch hitch balls as…

view full answer...

Answer 7

Hey Mike, the Seaflo MarineToilet part #SE74ZR weighs right at 30 lbs. Unfortunately it does not have a scale built into the seat haha, just kidding.

view full answer...

Answer 8

The upper holes for the Buyers Products 45 Ton 4-Hole Air Compensated Pintle Hook #337P45AC4 are spaced 5-1/4" on center. The lower holes are spaced 6-1/2" on center. The distance from the upper holes to lower holes are spaced 3" on…

view full answer...

Answer 9

I went out to our warehouse and measured the Buyers Products 45 Ton Pintle Hook #337PH45 for you. The mounting platform where the holes are drilled, has a thickness of 0.7 inches.

view full answer...

Answer 10

I do have some info for you but there isn't a torque spec for shackle bolts like the Shackle Bolt for 1-3/4" Wide Double Eye Springs part #007-003-01. Instead, you'll want to tighten the nut for the bolt until snug and then back it off a…

view full answer...

Answer 11

While we do have a couple Replacement Cables and Pins #3802350 & #SM99905 they are not always compatible with every Breakaway Switch #HM20010. I recommend replacing the switch with the Fastway Zip Trailer Breakaway Switch with Coiled Cable…

view full answer...

Safety Chains for 2011 Forest Rive Flagstaff Mac Pop-Up Camper

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching