bing tracking image
Q & A Icon

Determining if Camco RV Refrigerator Vent Cover # CAM42160 Will Fit Norcold Base  

Updated 07/22/2019 | Published 07/17/2019

Question:

I have a Norcold N841.3 purchased in 2013. Will the CAM42160 fit? I am most concerned about fitting the same 4 holes on top thank you,

0

Expert Reply:

The Camco RV Refrigerator Vent Cover # CAM42160 is designed for Norcold refrigerator bases but I went out to our warehouse to take some measurements on the mounting holes for the cover so you can compare it the specific N841.3 model you have. There are actually two sets of mounting holes that you can use to allow for different sizes.

The wider spaced holes are separated by 4-3/8 inches across the width of the cover and 22 inches along the length (on center). The narrower spaced holes are separated by 4-1/8 inches across and 23-1/2 inches along the cover's length.

I have attached an image to assist (I used the black version of the cover just because the holes were more easily seen). I recommend simply comparing these dimensions to the existing holes on your vent to see if this will work well.

expert reply by:
0
Chris R
click to enlarge

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>