Refrigerator Vent Cover Replacement for Atwood Dometic Refrigerator

Question

Question:

2014 Keystone Passport Elite - 28BH, Atwood Fridge Can this replace my fridge vent cover for my Atwood fridge? Photos attached.

asked by: John E

0

Expert Reply:

Only one photo came through, but Dometic bought out that portion of Atwood. We have the Replacement Lid for Dometic Refrigerator Vents - Polar White # VM65528 which may fit your Atwood fridge. The overall dimensions are 27 inches by 10-3/4 inches with the holes being 4-3/8 inches on center and 21-5/8 inches on center. I've attached a photo to assist.

expert reply by: Jason S

0

click to enlarge

Monte W.

8/2/2020

Looking for an Atwood fridge cover in white for my 2013 Keystone hideout trailer in white. hole to hole measurements are 23 inches in length and 4 1/4 wide.. Thanks

Reply

Jon G.

8/20/2020

It looks like the Camco RV Vent Cover will work for your application. This is available in White # CAM42160 as well as Black # CAM42163.

Reply

Answer 1

Hey Charles, I can certainly point you in the right direction. The best way to upgrade your suspension is with an upgraded equalizer and wet bolt/HD shackle kit. I really like the kits from MORryde since their cushioned equalizers and bolt kits tend…

view full answer...

Answer 2

I may have an option for you. Dometic bought out that portion of Atwood, we have had people in the past say that the Camco RV Refrigerator Vent Cover #CAM42160 has worked for their Atwood Refrigerator. It does list Dometic as a fit. I have included…

view full answer...

Answer 3

Hey Frevent! B&W does have options for a 2-1/2" hitch that work with the MultiPro but the rise/drop is going to be a little bit more. We have the B&W Tow & Stow 2-Ball Mount #BWTS20066BMP with a 7" drop/7-1/2" rise or the…

view full answer...

Answer 4

Hey Kent, That original power converter, although unnamed, is a Parallax or MagneTek brand converter. They are different companies but essentially the same part, or identical parts. With that said we do have a Progressive Dynamics Power Converter,…

view full answer...

Answer 5

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 6

Hi Leslie, We may have an option for you, but we don't have a base for the Ventmate cover, so you'd have to replace the base and and cover together. What you can likely use is a universal option from Camco, which will give you both the base…

view full answer...

Answer 7

Hey Troy, with the Dometic Penguin II with heat pump part #DMC38ZR you can use a wall thermostat with the part #DMC23ZR and the manual air box part #DMC43ZR but there isn't a remote controller option available at this time.

view full answer...

Answer 8

Hey Steven, so we have the Dometic Penguin Ii High Capacity 15k btu RV AC unit part #DMC33ZR which has a heat pump built into it like you are wanting. You will also need the air box part #DMC43ZR. If you were looking for something a little easier on…

view full answer...

Refrigerator Vent Cover Replacement for Atwood Dometic Refrigerator

Product Page this Question was Asked From

Continue Researching