Torque Specs for Install Bolts of Bulldog Cast Head Coupler w/ Wedge Latch # BD4420000317

Question

Question:

What are the tort full specs for this coupler?

asked by: Rudy R

0

Expert Reply:

The lock nuts of the Bulldog Cast Head Coupler w/ Wedge Latch # BD4420000317 need to be torqued down to 110 ft lbs of torque.

expert reply by: Jameson C

0

Answer 1

The difference between the Bulldog Cast Head Coupler, #BD4420000317, and the similar #BD4425000317, is exactly what you have said. The latter coupler has a 25,000 pound capacity rating while the first one is rated at only 20,000 pounds. The higher…

view full answer...

Answer 2

For the Bulldog trailer coupler #BD4420000317 you will need to use your own hardware. The bolt holes on the coupler are 5/8 inches in diameter. You will want to use grade 5 or higher quality bolts. The coupler could be welded on, however because this…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Ron, congratulations on the new trailer! I have a Jay Feather myself and love it. You're definitely off to a great start with a weight distribution hitch, it will make a world of difference towing that trailer with your F-150. The Weigh Safe…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hey Lawrence, thanks for the information. For your 7,500 lbs trailer, I recommend the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control item #EQ37100ET. This system works with tongue weights between 600 lbs - 1,000 lbs so it's going…

view full answer...

Answer 10

Hey there Michelle! While weight distribution systems are supposed to get the truck and trailer as level as possible, they are not complete miracle workers and won't make both 100% level in all situations. In fact, Andersen has a section of the…

view full answer...

Answer 11

Yes, it will Jim. The Andersen Weight Distribution Hitch w Sway Control item #AN28VR includes a shank with a 6" rise. This will put the top of the hitch ball 6" above the top of your receiver, which will be perfect for your trailers coupler…

view full answer...

Torque Specs for Install Bolts of Bulldog Cast Head Coupler w/ Wedge Latch # BD4420000317

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching