Recommend a Weight Distribution System for a Boat Trailer with Surge Brakes
Published 01/30/2008
Products Featured in This Question
Question:
Which Weight Distribution Hitch Assembly would I for a boat trailer made by Heritage with a swing away pole tongue with surge brakes? The trailer is tandum axle with 4 wheel disc brakes rated for 4000lbs. I do not want to imped the hydraulic action of the mastercylinder built into the trailer tongue.
asked by: Doug
Expert Reply:
The only WD Systems that we offer that work well with surge brakes are the Reese Steadi-Flex Systems. I recommend part # RP66558 which is rated for trailers with tongue weights ranging from 400-600 lbs. To choose the correct system, it's crucial to determine the tongue weight of the fully loaded and ready to tow trailer. The weight of anything carried in the cargo area or bed of the tow vehicle behind the rear axle should be added to the tongue weight figure. I have included a link to the installation details.
In addition to the WD System, you would need a pole tongue adapter. We have a pole tongue adapter that will work with the Pro Series WD, part number # RP58393.
Although an adjustable shank is included, the trailer ball is not. For a 2 inch ball, use part # A-90. For a 2-5/16 inch ball, use part # 19286.
I have linked an FAQ on common weight distribution questions.
