Is Replacement Hardware Available for CIPA ATV Handlebar Mirror?
Updated 03/06/2024 | Published 04/29/2019
Question:
The mirror was in operation for a couple of years. It was removed because the ATV was used in a brushy area last fall. Upon reinstalling the mirror this spring, it could not be completely retightened. Upon examination of the installation bolt, it was noted that it was bent slightly at the end and this caused stripping of some of the threads in the wedge nut. Can a replacement of the bolt and wedge nut be obtained?
asked by: Charles H
Helpful Expert Reply:
The CIPA ATV Handlebar Mirror - Black # CM11132 does not have any replacement parts from the manufacturer. Unfortunately you will need to replace the entire mirror since the wedge nut has been stripped.
Product Page this Question was Asked From
CIPA ATV Handlebar Mirror - Black
- ATV-UTV Mirrors
- ATV Mirror
- Handlebar
- Slide-On
- Left Hand
- Right Hand
- CIPA
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Recommended Tires And Wheels To Replace 18.5/8.5-8 Tires On Triton Trailer
- Q&A: Torque Rating for Trailer Wheel Lug Nuts
- Q&A: Comparing 215/60-8 Tires to 18.5/8.5-8 Tires for Height and Width
- Q&A: Will the CIPA ATV Handlebar Mirror Work with Heated Handlebar Grips
Bulvarious S.
3/5/2024
For about 10 bucks you can put a Heli coil in or tap it out with the next size up bolt