Recommended Class III Trailer Hitch Receiver for 2019 Lexus NX 300h Over Class 1 or Class II Options
Updated 04/23/2019 | Published 04/22/2019 >
Products Featured in This Question
Question:
Lexus recommends class 1 and you recommend class 3. I will be using it for a Kuat bike rack. The rack fits class 2 or 3. Wondering why you recommend 3 over 1. Upside? Downside?
asked by: Stan
Expert Reply:
I recommend the Class III hitch because it is allows for a greater range of accessories. The difference between class III and class II hitches is the 2 inch opening compared to the 1-1/4 inch receiver tube opening. There are far more accessories and bike racks that fit a 2 inch hitch than the smaller 1-1/4 inch and because the shank inserted in the receiver is larger they are more stable and can support more weight.
The Class I hitches are basically a class II hitch with a shorter shank often due to a weld stop. This only allows for class I compatible accessories and is very limiting. For instance with a bike rack, a class I hitch cannot hold more than 2 bikes according to manufacturer restrictions even on a 4 bike rack that would work on a class II or higher hitch.
My recommendation for you is the Curt Trailer Hitch Receiver # C13337. This is a strong hitch that will easily bolt right up to your 2009 Lexus NX 300h. The only downside is the receiver tube will sit slightly lower to the ground limiting your clearance by another inch.
This is compatible with all the styles of Kuat Bike racks. The benefit is that the NV like # NV22G can be expanded to 4 bikes if desired using # NA22G. The stability and strength of the Class III hitch will allow for this on your vehicle.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 525 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media




Continue Researching
- Q&A: Which Trailer Hitch Receiver Fits A 2019 Lexus NX 300 F-Sport?
- Q&A: Is the Draw-Tite Hitch Part Number 75956 still available?
- Q&A: Trailer Hitch for 2015 Lexus NX200t F Sport Model
- Q&A: Installation Process for 4-Pole Trailer Wiring Harnesses C56268 and 118652 on 2016 Lexus NX 200t
- Q&A: Comparison Of Curt And Tekonsha Wiring Harnesses For 2017 Lexus NX Turbo
- Q&A: What is Difference Between Curt and etrailer Hitch for 2017 Lexus NX300H
- Q&A: Class 3 Trailer Hitch For A 2025 Toyota RAV4 Hybrid
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Wiring Diagrams
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Article: Best Bike Racks for Electric Bikes
- Article: Is It Illegal to Leave My Hitch on My Truck?

