Parts Needed to Convert 2008 Inferno Toyhauler to Disc Brakes
Published 03/05/2019
Products Featured in This Question
Question:
I have a 2008 Inferno toyhauler by KZ RV. It has Lippert axles NV#167810. The ID tag on the axle says it is a 6000Lb axle. It has 8 lugs. Do you have a Disc brake conversion kit for these axles? It is triple axle so I would need everything for a triple axle setup. Your recommendations would be greatly appreciated.
asked by: Mike F
Expert Reply:
The Kodiak Disc Brake Kit # K2HR79E fits your Lippert 6k axles and has the 8 lug bolt pattern like you need so it would be exactly what you'd want. You'd need a set for each axle. For bearings you'll need part # 25580 and # 02475 for each assembly plus the seal # RG06-070 for each assembly.
For a triple-axle disc brake trailer you will want a 1600-psi electric-over-hydraulic actuator to ensure sufficient operating pressure. We offer a nice kit from CTS, the HydraStar Marine Electric Over Hydraulic Actuator # CAR-HBA16-2, which includes wiring and breakaway and enough lines for a tandem axle trailer. Since you have a triple axle trailer you'll need also the part # 9579-01 and you'd be set.
