Dimension of Firestone Replacement Pneumatic Switch F9074

Question

Question:

Is this for 1/4 inch air line?

asked by: Raul E

0

Expert Reply:

Yes, the Firestone Replacement Pneumatic Switch # F9074 is intended for 1/4-inch air line # F9416 as found in kits like # F2145.

expert reply by: Adam R

0

Answer 1

The Replacement Switch for Firestone Pneumatic Control Panel #F9074 is designed to work with Single Function Air Spring Control Panels #F2149 and #F2225 as well as Dual Function Air Spring Control Panels #F2145 and #F2241, which use 1/4" air…

view full answer...

Answer 2

There isn't an easy way to convert an Air Lift WirelessAIR from single path to dual path. Since nearly all components aside from some fittings would need to be replaced your best option is to go with the new kit part #AL74000EZ.

view full answer...

Answer 3

The only option we can offer to control air bags using an existing on-board compressor system for another purpose is with manual inflation valves like what come with the Dual Function Air Spring Control Panel part #F2145. We don't have any…

view full answer...

Answer 4

You will need to switch the single path gauge on system #AL25690 to a dual-path gauge to be able to control each air bag individually. You can use Firestone kit #F2145. It comes with the gauge, additional hose, fittings, and wiring plus accessories.…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 9

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 10

Hey Randy thanks for the information! Here are the parts you'll need to add a brake controller to your 2006 Dodge Ram 1500 with a factory 4-Way connector: Brake Controller and Custom Fit Wiring Harness - Curt TriFlex NEXT item #C43GV 7-Way…

view full answer...

Answer 11

Hey David, we have everything we need to flat tow your 2006 Dodge Ram 1500 4WD but the first thing you need is a base plate kit like the Blue Ox part #BX1988 which I like because in my experience the Blue Ox kits are just really well made and easier…

view full answer...

Answer 12

If your 2006 Dodge Ram 2500 already has the B&W Underbed Kit #BWGNRK1308-5W installed, then the B&W Companion #BWRVK3400-5W is definitely the best option for towing a fifth-wheel trailer. The Companions are considered by many to be the best…

view full answer...

Dimension of Firestone Replacement Pneumatic Switch F9074

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching