What is the Pro Series Hitch Ball Platform Thickness and Hole Diameter?
Updated 01/07/2019 | Published 01/04/2019
Question:
What is the ball platform thickness and the hole diameter for part # 63071?
asked by: Philip J
0
Expert Reply:
The Pro Series Adjustable 2-Ball Mount for 2" Hitches - 5-7/8" Drop, 4-5/8" Rise - 14K # 63071 has a hitch pin hole diameter of 3/4 inches at the ball platform and 5/8 inches at the hitch pin hole. There is a lock set # 63069 made to secure this ball mount.
The ball platform has a thickness of 3/4 inches at the hitch ball with the thickness of the hitch ball welds adding to 1-1/2 inches. The thickness at the shank is 3-3/8 inches. I've attached a photo to assist with these platform dimensions.
expert reply by:
Jason S
0
click to enlarge
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 235/80 r16
- Search Results: l44649
- Search Results: 235 85 16
- Search Results: 2" light
- Search Results: pintle
- Search Results: plate light
- Shop: Curt Pintle Hook - Bolt On - 10,000 lbs
- Search Results: trailer fender
- Shop: Rambler ST235/80R16 Radial Trailer Tire - Load Range E
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Replacement Trailer Hub Bearing - L44649
- Shop: Curt Pintle Hook with 2-5/16" Ball for 2-1/2" Hitches - 20,000 lbs
- Shop: Dexter 12V KTI Hydraulic Pump - Single/Double Acting - 6 Qts
- Q&A: How to Determine if a Hub Was Originally Designed as an Oil Bath or Grease Hub