bing tracking image
Q & A Icon

Choosing a Slide-Topper for 109 Inch Slide-Out  

Updated 09/05/2025 | Published 09/18/2018

Products Featured in This Question



Question:

My slide out measures just over 109inch from outside edge of flanges. What width topper do I order and what do you have available

0

Expert Reply:

The flange-to-flange measurement you took is the correct way to measure for a slide-topper and the width you need is one that extends past the slide-out's overall width so for your 109 inch (9 foot, 1 inch) slide-out you will want a 9-1/2 foot slide-topper.

For that we have the Solera 9.5' Slider (Slide-Topper) in White w/ White Hardware # LCV000163291 or for Black with Black hardware you need part # LCV000168325.

expert reply by:
0
Kyle S
Jamie I. profile picture

Jamie I.

9/5/2025

Hey Kyle, I'm looking for a way to shade the slide out that contains my fridge to help keep it cooler, but my factory awning is right next to it and it doesn't seem like there would be enough clearance for both (less than 3") based on what I've read. Is this correct? And if so, any other suggestions on what I could do to keep this area cooler if a slide awning isn't an option? Thanks in advance for the help.

Jesse M. profile picture
Etrailer Expert

Jesse M.

9/5/2025

@JamieI Hello Jamie. In order to install a slide out awning, you need at least 7" of clearance on both sides of the slide. If space isn't available, it is not possible to install an awning. Aside from this I'm afraid we don't have another solution for shading your slide out. Park under a tree?

Product Page this Question was Asked From