Ball Mount and Hitch Balls for Use with Curt Hitch C12051 for 2007 Saturn Aura

Updated 09/18/2018 | Published 09/17/2018

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

(18)

$225.85

1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs

(2621)

$16.53

2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs

(2621)

$18.47

Curt Class II Drawbar - 3-1/8" Rise - 11-1/4" Long - 3,500 lbs

(2273)

$37.02

Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector

(1674)

$74.95

Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2" Span

(2932)

$2.69

Question:

I am pulling a14’ aluminum boat. Will this receiver accept a 1 7/8 ball?

asked by: Jim K

Expert Reply:

Curt's 1-1/4-inch Class II hitch # C12051 is a confirmed fit for your 2007 Saturn Aura. This hitch is rated to tow up to 3500-lbs but your car's rating may be different so be sure to check your owner's manual. The Aura's towing capacity will depend on all of the specific equipment in it.

The recommended ball mount # C45522 that fits this hitch can be used with a 1-7/8-inch hitch ball such as # 19256 and also with a 2-inch ball such as # 19258. It just depends on the coupler size on the boat trailer. Usually the required ball size will be stamped into the coupler housing. You will also need a Pin and Clip # F-4.

If you also need a 4-pole wiring harness to power the trailer lights, I suggest the Curt Powered Tail Light kit # C59236 which offers simple plug-in installation.