Recommended In-Bed 7-Way Wiring Harness Connection for 2019 Ford F-250 Super Duty

Question

Question:

7-Way for in-bed camper on 2019 F-250 Super Duty

asked by: Thomas

0

Expert Reply:

For your 2019 Ford F-250, I recommend the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness with 7-Pole Plug # 41157. This wiring harness is 10 feet long and will connect to your factory harness at your bumper 7-way and will allow you to add the 7-way to your truck bed in a location suitable for your in bed camper even if that is the cab side of the bed. This harness has a nice 90 degree angle for a tight fit. I've attached a photo to assist. This will give you the features needed for your camper and still allow trailer connections at your bumper for other needs. I've attached an installation video on a similar truck to assist.

expert reply by: Jason S

0

click to enlarge

Answer 1

It sounds like you are on the right track to rewire your cattle trailer. You are correct about the wire colors on the 7-way connector that you purchased. The colors that you see on the 7-way connector are typical for RV style trailers rather than…

view full answer...

Answer 2

Hey Skip, for a new 7-way and 4-way at the rear of your 1999 Ford F-350 you would want the Hopkins part #HM40975 and then for a kit to install a 7-way in the bed of your truck you'd want the part #41157. This part number comes with the harness…

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

Hi David! 5th wheel wiring harnesses, like the 7 foot long Bargman #54700-003 (universal) or #54701-007 (custom fit to your 2022 F-250), are made longer than most other wiring harnesses for convenience. What I mean by that, it allows you the…

view full answer...

Answer 8

There isn't a way to install zerk fittings on your spindle to make it an EZ lube spindle, but we do have Bearing Buddies which are designed for spindles like yours that do not have the zerk fittings to make installing grease in them easier. You…

view full answer...

Answer 9

The only Pullrite Super Glide fifth wheel hitch that will work with either the Curt #C16427-204 or Reese #RP50054-58 custom base rails is the Pullrite that is the ISR Series (the ISR stands for "industry standard rails"). Though we do not…

view full answer...

Recommended In-Bed 7-Way Wiring Harness Connection for 2019 Ford F-250 Super Duty

Featured Help Information

Miscellaneous Media

Continue Researching