Center Bore Diameter for Dexter Trailer Hub and Drum Assembly With 8 on 6-1/2" Bolt Pattern
Updated 07/31/2018 | Published 07/30/2018
Question:
WHAT WHEEL PILOT DIAMETER FITS THIS HUB
asked by: MARTY
0
Expert Reply:
The pilot hole for your wheel will need to be 4-3/4" or more to be used with Dexter Trailer Hub and Drum Assembly # 8-219-13UC3. This is a lug-centric hub which uses lug nuts to secure the wheel to the hub and your wheel will need to have an 8 on 6-1/2" bolt pattern to work with the hub.
expert reply by:
Kyle S
0
Product Page this Question was Asked From
Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- 25580 / 14125A
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 9/16 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Installation of Lippert Components Universal Slide Out Wear Pads
- Article: Trailer Wiring Diagrams
- Q&A: Comparing Dexter and etrailer.com 7,000 Pound Electric Brake Assemblies
- Q&A: Replacement Electric Brakes for Dexter PR-FF SEC-FF 5.2KPR-GGSEC-GG 12X2XQ 36-89
- Q&A: Which Leaf Spring Is The Best Replacement For A Bouncy 2019 Grand Design Momentum 351m 7K Axles?
- Q&A: Recommended Replacement Brake Hubs and Brakes for a Dexter 7K Axle
- Q&A: Replacement Hub Assembly For EZ Loader Trailer Hub 300-020883
- Q&A: Meaning of MTI Number On Dexter Hub and Drum Assembly
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Most Popular Wheel Bearings
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Aftermarket Brake Control Wiring for 07-13 GM Full-Size Truck with Factory-Integrated Brake Control
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer