Spring Seats and Nut Coupling Available Separately for Over-Under Conversion Kit

Updated 07/26/2018 | Published 07/25/2018

Products Featured in This Question

Dexter Trailer Springs Over-Under Conversion Kit

(858)

$77.48

Dexter Nut Coupling - 1/2" -13 - Qty 1

(7)

$3.79

Mounting Nut for 7" and 10" Brake Assemblies - 7/16" Diameter - Zinc Plated

(109)

$2.04

Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter

(671)

$16.35

Question:

K71-384-00 Dexter Axle Over/Under Conversion Kit - Hello, I have this axle setup, with the axle over the springs, and will be putting them above the springs. I plan to use the existing u-bolts, nuts, and u-bolt plates. Do you provide the spring seats and spacer nuts to purchase separately? The axles are 2 3/8inch and the springs are 1 3/4inch wide. The trailer is not very old and the it looks like the nuts are not too rusted or corroded and should come off fairly easily. Thank you

asked by: Bill A

Expert Reply:

Hello! I am a bit confused by the question, but I believe you are saying you are going to be using the Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00 on your trailer and want to know about the availability of spring seats and spacer nuts, correct?

If so you do not need to purchase those separately because they come with the kit already.

If you were asking about piecing together this kit, there are individual components available:

- Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter: # TRSS238

- Dexter Axle Nut Coupling - 1/2" -13: # 006-094-00 (These come in a quantity of one so you'd need to order the amount you need)

- Mounting Nut: # 6-17