Bike Rack Compatible With Beach Cruiser That has Fenders, Childs Bike and Mountain Bike

Question

Question:

So I have 3 bikes to carry: 26inch tire Cruiser bike with fenders with step through frame 26inch mountain bike 20inch childrens bike I have a 2015 Subaru Impreza hatchback. Given the combination of options, the least expensive, and most comprehensive solution appears to be to purchase the KU24FR Kuat Transfer 3 bike and pair that with the only class 2 hitch available, for this car. The only concern is whether the kuat transfer will be ok with the fender on my wifes cruiser style bike. Will it be secure enough? I dont have roof rails installed in the car, and the only other combo I see is a class 1 hitch install for a 2 bike rack, that is compatible with fenders, and then a rack install for the extra bike, but would be more expensive, and convoluted. Thank you

asked by: Omar

0

Expert Reply:

The EcoHitch Invisi Trailer Hitch Receiver # 306-X7211 is the only hitch available for your 2015 Subaru Impreza hatchback that is above a Class I has has a 2" receiver, so it is the only option for carrying more than two bikes on your car; a Class I hitch is limited to carrying a maximum of two bikes.

In regards to the Kuat Transfer # TS02G, it will NOT be compatible with a bike that has fenders because it is a wheel-mounted rack and will interfere with the fenders.

Considering all the different bikes you have, your best option is the Hollywood Racks Sport Rider SE 4-Bike Platform Rack # HR1400Z. This rack has adjustable wheel holders that will work with 20" wheelbases like the children's bike, has a 50 lb per bike capacity and is a frame-mount so you are going to need Bike Frame Adapter Bar for Women's and Alternative Frame Bikes # HRBA-PRO to give your cruiser with a step-through frame a vertical mounting point for the Sport Rider's ratcheting hook to attach to.

I've added a link to a video review of this rack for you to check out as well.

expert reply by: Kyle S

0

Answer 1

We do indeed offer the EcoHitch X7212, which we offer as part #EH22RR which is compatible with the 5 door wagon Impreza models with a single exhaust and the knockout panel on the rear bumper face. If you'll be using the hitch for light duty…

view full answer...

Answer 2

On the Curt Class I Trailer Hitch #C11286, the distance from the center of the hitch pin hole to the forward end of the receiver tube is 5 inches. I spoke with my contact at Curt and confirmed this measurement. I have attached a photo showing the…

view full answer...

Answer 3

I do have an option for you but the EcoHitch Invisi Trailer Hitch Receiver part #306-X7211 is only listed as a fit for the hatchback (5-door) models of the 2012 Subaru Impreza and will not work on your sedan (4-door) model. For your sedan we have two…

view full answer...

Answer 4

The Draw-Tite Sportframe Trailer Hitch Receiver part #DT24959 (25 Lbs) and EcoHitch Invisi Trailer Hitch Receiver part #306-X7211 (30 Lbs) are both great options for a 2013 Subaru Impreza Wagon. I recommend the EcoHitch because it has the best look…

view full answer...

Answer 5

The dimensions you need to consider when seeing if the Yakima RidgeBack 2 #Y02457 will clear the fascia Eco-Hitch Invisi Trailer Hitch Receiver #306-X7211 is the 9-1/2 inches from the center of the hitch pinhole to the closest part of the RidgeBack…

view full answer...

Answer 6

The length of the receiver on hitch #306-X7211 isn't the issue. It is were the hitch pin hole is relative to the end of the receiver which on this model is close to 1-1/2 inches. Standard is around 2 inches (on center). The receiver…

view full answer...

Answer 7

If your 2013 Subaru Impreza has a single exhaust that has a knock out panel located in the fascia under the rear bumper, the EcoHitch #306-X7211 will fit your vehicle. As you can see in the provided photos, the receiver tube will actually sit behind…

view full answer...

Answer 8

The most economically priced options for a hitch on your 2012 Subaru Impreza 5 door Wagon is going to depend on whether you have a WRX/WRX Sti or not. If you DO have the WRX/WRX Sti then the hitch that you want is the Curt Trailer Hitch Receiver…

view full answer...

Answer 9

The capacity of any towing system will always be limited by the capacity of its lowest-rated component. Although the Reese #PS10401-10402 cargo carrier has a 400 lb capacity and the EcoHitch #306-X7211 you'd looked at has a 525 lb tongue weight…

view full answer...

Answer 10

If you have the center knock-out panel in the lower rear fascia of your 2016 Impreza, the EcoHitch Invisi Trailer Hitch Receiver #306-X7211 will work great for you. This is a class lll hitch and it has a 2 inch receiver opening. This hitch is…

view full answer...

Answer 11

For your 2016 Subaru Impreza hatchback, the EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2" #306-X7211 is the only hitch receiver we carry that fits in the cutout in the bumper. I reached out to the manufacturer and this…

view full answer...

Answer 12

You're really done your research here, and while we have a 2 inch receiver that fits your 2015 Subaru Impreza, we can't recommend going with one from Curt or Draw-Tite. At one point, the 2" Draw-Tite Trailer Hitch Receiver #76084 was…

view full answer...

Bike Rack Compatible With Beach Cruiser That has Fenders, Childs Bike and Mountain Bike

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching