bing tracking image
Q & A Icon

Does the Aries Grille Guard Interfere with Active Shutters on the 2017 Ford Explorer  

Published 06/07/2018

Question:

My 2017 explorer has active shutters behind the grill. Where does this grill mount as to not interfere?

0

Expert Reply:

The Aries grille guard # AA3068 mounts to the frame on your 2017 Ford Explorer. The tubing is not so large as to restrict airflow to the active shutters on the vehicle. There is some trimming that needs to be done. I will email you the instructions for greater detail but it states the following:

Hold the Frame Bracket in the approximate position over the Bolt and Nut Plates. Mark the outline of the Bracket onto the mounting tab on the plastic air inlet, (scoop), (Figure 7). Remove the inlet and place it on a clean, stable work surface. Use a hacksaw to cut the required material from the mounting area on the inlet. Check the fit often and trim material away as necessary. Do not cut off the mounting tab. Carefully pry off the metal clip and move it as indicated in Figure 7 or drill a 1/4" hole through the top and bottom of the scoop and replace the clip with the included (1) 5mm x 25mm Screw, (2) 5mm Flat Washers and (1) 5mm Nylon Lock Nut. Do not over-tighten 5mm hardware. IMPORTANT! Any cutting tool may break or shatter. Government regulations require safety glasses & equipment at all times when cutting. Install the Frame Bracket as described in Step 3. NOTE: Complete the Grille Guard installation before reinstalling the plastic air inlet scoop, (Step 15).

expert reply by:
0
Michael H

Product Page this Question was Asked From