Replacing Weld-On Coupler with Bolt-On Coupler on Older Winnebago Travel Trailer
Updated 06/07/2018 | Published 06/06/2018 >
Question:
I have an old Winnebago Travel Trailer with a damaged coupler. What are your recommendations? Can I cut off the coupler with a torch and replace it with a bolt on unit?
asked by: Paul M
Helpful Expert Reply:
We have a large selection of A-Frame couplers like what would be on your older Winnebago travel trailer. You can certainly remove your weld-on coupler and replace it with a bolt-on unit, as long as the new coupler's capacity is correct for your trailer and it is the proper size for fitment. I just recommend sanding and painting the tongue after removal. Also just keep in mind that you will need to drill some holes into the tongue so that you can install a bolt-on coupler to replace it.
I have attached a link that will take you to our available selection of bolt-on A-Frame couplers that you can look through. I am not sure what capacity you will need for your trailer, so I just recommend verifying your trailer's GVWR and selecting a unit that matches or exceeds this number.
For example, the Demco A-Frame Trailer COupler # DM14793-81 features a weight capacity of 10,000 pounds. It will use a ball size of 2 inches and it has an overall length of 17-5/8 inches. I have attached a short video demonstration on this coupler that you can take a look at.
Product Page this Question was Asked From
Demco A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Black Painted - 2" Ball - Bolt On - 10K
- A-Frame Trailer Coupler
- Standard Coupler
- 50-Degree Frame
- Bolt-On
- 10000 lbs GTW
- 2 Inch Ball Coupler
- Auto Latch
- 2-1/4 Inch Hole
- Standard Grade
- Demco
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Demco Cast Head Coupler w/ Jack Hole - eZ-Latch - 2" Ball - A-Frame - Bolt-On - 10K
- Shop: A-Frame Trailer Coupler - Yoke Latch - Black - 2" Ball - Weld On - 8,000 lbs
- Video: Demco Cast Head Coupler w/ Jack Hole Spec Review
- Video: Complete Breakdown of the A-Frame Trailer Coupler
- Shop: Demco A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Black Painted - 2" Ball - Bolt On - 10K
- Shop: Demco 32-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Black - 2-5/16" Ball - 21K
- Search Results: installation services
- Shop: Tool Box
- Search Results: ez lube
- Search Results: trailer valet trailer dolly
- Search Results: trailer jack wheel
- Search Results: wheels for trailer jacks
- Q&A: How to Measure the Angle of Trailer A Frame To Determine if a 50 Degree A Frame Coupler will Fit
- Q&A: Can Weld-On A-Frame Trailer Coupler be Replaced with a Bolt-On Coupler
- Q&A: Tongue Box Cargo Box Recommendation for Trailer Carrying Two 12 inch Diameter Propane Tanks
- Q&A: Coupler Solution for A-Frame Trailer that Has 60 Degree Frame Angle
- Q&A: Parts Needed to Switch a Trailer From Surge Brakes To Electric Over Hydraulic Brakes
- Q&A: Upgrading Trailer Brakes on a Single Axle Trailer With Heavy Duty Self Adjusting Brakes
- Q&A: Can I Remove A Weld-On Trailer Coupler and Replace it With A Bolt-On Coupler?
- Video: Hands-On with the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket
- Shop: Buyers Products Utility Storage Box - Black - 51" x 19-1/2" x 22-1/2"
- Shop: Elbow Joint for Trailer Valet Side Mount Dolly Brackets
- Shop: Removable 6" Wheel for Dutton-Lainson A-Frame Trailer Jacks - 2" Inner Tube Diameter
- Shop: Suspension Enhancement
- Search Results: sumo springs for trailer
- Search Results: sumosprings


