Recommend Trailer Coupler Lock That Will Help Deter Theft
Updated 01/22/2013 | Published 09/01/2011 >
Question:
Which is more secure the maximum security or gorilla gard trailer lock. Can't tell diameter of locking bar.. Can it be cut with heavy duty bolt cutters. I have cut hardened steel with large bolt cutters in the past.
asked by: Jack
Expert Reply:
I walked out to our warehouse and pulled the Tow Ready Trailer Coupler Lock. The locking bar measures approximately a 1/2 inch in diameter. The representative at Tow Ready informed me that the lock is made of 1407 steel.
I then contacted our representative at Fastway about the Universal Trailer Coupler Lock, part # FA86-0015-316. He informed me that this locking bar has a diameter of 5/8 inch hardened steel. He informed me that this is the biggest and strongest lock on the market and is not able to be cut with bolt cutters.
I would recommend going with the Fastway # FA86-0015-316, as we have had great reviews from customers on this lock.
However, with opportunity and time a determined thief will normally get the item they are after. Using the coupler lock will help deter theft and make your trailer harder to steal.
Product Page this Question was Asked From
Fastway Universal Coupler Lock for 1-7/8", 2" and 2-5/16" Couplers - Key 316
- Trailer Tongue Lock
- Surround Lock
- Universal Application Lock
- Keyed Alike
- Steel
- Fits 1-7/8 Inch Ball
- Fits 2 Inch Ball
- Fits 2-5/16 Inch Ball
- Fastway
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Can Extra Keys Be Ordered with the Fastway Coupler Lock part # FA86-0015-314
- Q&A: What Trailer Coupler Lock will Work with My Bulldog-style Bolt-On Coupler for 5,000 Pounds?
- Article: The Best Trailer Tongue Locks for Preventing Trailer Theft
- Q&A: Will the Pacbrake Alpha HD Air Bag Suspension Kit Fit a 2018 Ram 1500?
- Q&A: Can the Fastway Trailer Coupler Locks Be Keyed Alike
- Q&A: Replacement 4-Way for Karavan Boat Trailer with 8 Wires
- Q&A: Fan and Roof Vent Cover for 2018 Aliner Expedition Camper
- Q&A: Can a 15x5 Wheel Size Interchange with a 15x6 Wheel Size on a 1995 Mallard Travel Trailer
- Article: How to Measure for Trailer Hitch Drop
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: Steel vs. Aluminum Ball Mounts
- Article: Trailer Maintenance Schedule
- Article: Types of Trailer Hitches: How and Why to Use Each
- Article: How to Choose the Best Tonneau Cover



Mark
1/12/2013
Regarding your recommendation of Diversi-Tech DT25013 being more secure, it should be mentioned that DT uses a tubular key lock. These are incredibly easy to open using the plastic barrel of a Bic ballpoint pen. This came to light a few years ago when bike thieves discovered the trick with Kryptonite locks. You can google about it..Its good info that the DT lock has a thicker, hardened shank. But, the tubular lock makes it much more prone to defeat than the Tow Ready which is under discussion. Im not thrilled by any of the trailer locks. I think the Blaylock with the three pin holes may be the best *if* you use one of those hidden shank, round solid-core locks used to lock hasps like to secure rear van doors or vending machines. The opening in the back isnt large enough for the Blaylock pin. You have to grind flats onto the pin end so it will fit into the hasp lock. Im leaning toward this, but the Blaylock pin isnt hardened. If Blaylock made a hardened pin for use with this type of lock it would be, IMO, the best trailer lock. Maybe eTrailer has some in with the company and could make a recommendation? Just a smaller hole in the pin, flats on the end where the hole is, and hardened. A potential upgrade item..