Bike Rack Recommendation for Burley Long Wheelbase Recumbent

Question

Question:

I am looking for a bike rack that will accommodate a Burley long wheelbase recumbent. Please help!

asked by: Cheri

1

Helpful Expert Reply:

Since recumbent bikes like your Burley long wheelbase model have very long wheelbases the best option is a rack designed with that in mind like the Hollywood Racks Sport Rider part # HR1000Z-R which can fit up to a 74 inch wheelbase.

expert reply by: Jameson C

1

Answer 1

Hello Jim, thanks for reaching out. We do have one bike rack that can be used with recumbent bikes like your Bacchetta Bella. Take a look at the Swagman XC-Extended Bike Rack for 2 Recumbent Bikes #S64650-EXT. This has an attachment that allows it to…

view full answer...

Answer 2

The wheel trays on the Yakima FourTimer 4 Bike Platform Rack part Y02469-FB can be moved. However, they can only accommodate a bike with a max wheelbase of 48". Therefore, I instead recommend you take a look at my personal favorite bike rack,…

view full answer...

Answer 3

Hey Brian, so there's a chance the Hollywood Racks RV Rider part #HLY64FR will work for you but we need to know your wheelbase as well. The wheelbase is the distance between the axle centers of the bikes basically. This has a max wheelbase it can…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 9

Hey Adam, we have just what you are looking for with the B and W fifth wheel rail kit part #BWRVK2402 which is a confirmed fit for your 2017 Ford F-250 and is the industry standard rail design which means it will fit the hitch you have. This is a…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Hey, Dan. Thanks for your question! These two part numbers can definitely be a little confusing, but they’re essentially the same setup. The PullRite #PUL73RR is an all-in-one part number that includes everything you need. The PullRite #PUL25RR is…

view full answer...

Bike Rack Recommendation for Burley Long Wheelbase Recumbent

Continue Researching